Carefully follow the refill instructions below to refill your HP Deskjet 1120c black ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Deskjet 1120c black ink cartridges although the principles are the same if you already have a refill kit

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Turn the cartridge upside down. Remove the plastic film that seals the filling hole ( A ) and push the ball bearing into the cartridge using an old ballpoint pen.
2. Important do not damage the hole when pushing the ball bearing into the cartridge. Note the inserted ball bearing will not damage the cartridge.
3. Assemble the syringe and needle , Pierce the bottle seal and draw up some black ink.
4. Gently fill the cartridge with ink. ( The cartridge must remain upright until instructed ).
5. Once the cartridge is full, the fill hole can now be plugged using one of the red plugs. Important the plug must be airtight if not the cartridge will leak.
6. To pressure balance the cartridge correctly, prepare a thick pile of kitchen paper. Turn the cartridge the right way up and dab off the ink that drips from the printhead. This is normal and will stop quickly when the cartridge has balanced.
7. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
8. Important do not leave your cartridge on the absorbent material for an extended period.
9. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
10. Clean the syringe and needle for future use.

HP Deskjet 1120c Colour Ink Cartridge Refill Instructions

Carefully follow the refill instructions below to refill your HP Deskjet 1120c colour ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Deskjet 1120c colour ink cartridges although the principles are the same if you already have a refill kit.

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

Important when refilling take care to refill colours as per the picture Not - as inferred on the cartridge label.

1. The filling holes are located on top of the cartridge. Using the drill provided, make holes in the positions marked.
2. Assemble the syringe and needle , Pierce the bottle seal and fill with the correct colour ink.
3. Insert the needle into the filling hole and push down into the cartridge. Important the cartridge contains sponge and slight resistance may be felt.
4. Slowly inject the ink. Blot the printhead with tissue to remove any excess ink before continuing to refill the next colour.
5. Important do not reseal the filling holes. Clean the syringe with water and dry before refilling with another colour.
6. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
7. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
8. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.

Carefully follow the refill instructions below to refill your HP Deskjet 1000cxi black ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Deskjet 1000cxi black ink cartridges although the principles are the same if you already have a refill kit

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Turn the cartridge upside down. Remove the plastic film that seals the filling hole ( A ) and push the ball bearing into the cartridge using an old ballpoint pen.
2. Important do not damage the hole when pushing the ball bearing into the cartridge. Note the inserted ball bearing will not damage the cartridge.
3. Assemble the syringe and needle , Pierce the bottle seal and draw up some black ink.
4. Gently fill the cartridge with ink. ( The cartridge must remain upright until instructed ).
5. Once the cartridge is full, the fill hole can now be plugged using one of the red plugs. Important the plug must be airtight if not the cartridge will leak.
6. To pressure balance the cartridge correctly, prepare a thick pile of kitchen paper. Turn the cartridge the right way up and dab off the ink that drips from the printhead. This is normal and will stop quickly when the cartridge has balanced.
7. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
8. Important do not leave your cartridge on the absorbent material for an extended period.
9. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
10. Clean the syringe and needle for future use.

HP Deskjet 1000cxi Colour Ink Cartridge Refill Instructions

Carefully follow the refill instructions below to refill your HP Deskjet 1000cxi colour ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Deskjet 1000cxi colour ink cartridges although the principles are the same if you already have a refill kit.

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

Important when refilling take care to refill colours as per the picture Not - as inferred on the cartridge label.

1. The filling holes are located on top of the cartridge. Using the drill provided, make holes in the positions marked.
2. Assemble the syringe and needle , Pierce the bottle seal and fill with the correct colour ink.
3. Insert the needle into the filling hole and push down into the cartridge. Important the cartridge contains sponge and slight resistance may be felt.
4. Slowly inject the ink. Blot the printhead with tissue to remove any excess ink before continuing to refill the next colour.
5. Important do not reseal the filling holes. Clean the syringe with water and dry before refilling with another colour.
6. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
7. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
8. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.

Carefully follow the refill instructions below to refill your HP Deskjet 1100c black ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Deskjet 1100c black ink cartridges although the principles are the same if you already have a refill kit

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Turn the cartridge upside down. Remove the plastic film that seals the filling hole ( A ) and push the ball bearing into the cartridge using an old ballpoint pen.
2. Important do not damage the hole when pushing the ball bearing into the cartridge. Note the inserted ball bearing will not damage the cartridge.
3. Assemble the syringe and needle , Pierce the bottle seal and draw up some black ink.
4. Gently fill the cartridge with ink. ( The cartridge must remain upright until instructed ).
5. Once the cartridge is full, the fill hole can now be plugged using one of the red plugs. Important the plug must be airtight if not the cartridge will leak.
6. To pressure balance the cartridge correctly, prepare a thick pile of kitchen paper. Turn the cartridge the right way up and dab off the ink that drips from the printhead. This is normal and will stop quickly when the cartridge has balanced.
7. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
8. Important do not leave your cartridge on the absorbent material for an extended period.
9. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
10. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.

Carefully follow the refill instructions below to refill your HP Designjet 750cm ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Designjet 750cm ink cartridges although the principles are the same if you already have a refill kit

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Turn the cartridge upside down. Remove the plastic film that seals the filling hole ( A ) and push the ball bearing into the cartridge using an old ballpoint pen.
2. Important do not damage the hole when pushing the ball bearing into the cartridge. Note the inserted ball bearing will not damage the cartridge.
3. Assemble the syringe and needle , Pierce the bottle seal and draw up some black ink.
4. Gently fill the cartridge with ink. ( The cartridge must remain upright until instructed ).
5. Once the cartridge is full, the fill hole can now be plugged using one of the red plugs. Important the plug must be airtight if not the cartridge will leak.
6. To pressure balance the cartridge correctly, prepare a thick pile of kitchen paper. Turn the cartridge the right way up and dab off the ink that drips from the printhead. This is normal and will stop quickly when the cartridge has balanced.
7. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
8. Important do not leave your cartridge on the absorbent material for an extended period.
9. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
10. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.

Carefully follow the refill instructions below to refill your HP Designjet 750cPlus ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Designjet 750c Plus ink cartridges although the principles are the same if you already have a refill kit

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Turn the cartridge upside down. Remove the plastic film that seals the filling hole ( A ) and push the ball bearing into the cartridge using an old ballpoint pen.
2. Important do not damage the hole when pushing the ball bearing into the cartridge. Note the inserted ball bearing will not damage the cartridge.
3. Assemble the syringe and needle , Pierce the bottle seal and draw up some black ink.
4. Gently fill the cartridge with ink. ( The cartridge must remain upright until instructed ).
5. Once the cartridge is full, the fill hole can now be plugged using one of the red plugs. Important the plug must be airtight if not the cartridge will leak.
6. To pressure balance the cartridge correctly, prepare a thick pile of kitchen paper. Turn the cartridge the right way up and dab off the ink that drips from the printhead. This is normal and will stop quickly when the cartridge has balanced.
7. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
8. Important do not leave your cartridge on the absorbent material for an extended period.
9. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
10. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.

Carefully follow the refill instructions below to refill your HP Designjet 750c ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Designjet 750c ink cartridges although the principles are the same if you already have a refill kit

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Turn the cartridge upside down. Remove the plastic film that seals the filling hole ( A ) and push the ball bearing into the cartridge using an old ballpoint pen.
2. Important do not damage the hole when pushing the ball bearing into the cartridge. Note the inserted ball bearing will not damage the cartridge.
3. Assemble the syringe and needle , Pierce the bottle seal and draw up some black ink.
4. Gently fill the cartridge with ink. ( The cartridge must remain upright until instructed ).
5. Once the cartridge is full, the fill hole can now be plugged using one of the red plugs. Important the plug must be airtight if not the cartridge will leak.
6. To pressure balance the cartridge correctly, prepare a thick pile of kitchen paper. Turn the cartridge the right way up and dab off the ink that drips from the printhead. This is normal and will stop quickly when the cartridge has balanced.
7. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
8. Important do not leave your cartridge on the absorbent material for an extended period.
9. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
10. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.

Carefully follow the refill instructions below to refill your HP Designjet 700 ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Designjet 700 ink cartridges although the principles are the same if you already have a refill kit

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Turn the cartridge upside down. Remove the plastic film that seals the filling hole ( A ) and push the ball bearing into the cartridge using an old ballpoint pen.
2. Important do not damage the hole when pushing the ball bearing into the cartridge. Note the inserted ball bearing will not damage the cartridge.
3. Assemble the syringe and needle , Pierce the bottle seal and draw up some black ink.
4. Gently fill the cartridge with ink. ( The cartridge must remain upright until instructed ).
5. Once the cartridge is full, the fill hole can now be plugged using one of the red plugs. Important the plug must be airtight if not the cartridge will leak.
6. To pressure balance the cartridge correctly, prepare a thick pile of kitchen paper. Turn the cartridge the right way up and dab off the ink that drips from the printhead. This is normal and will stop quickly when the cartridge has balanced.
7. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
8. Important do not leave your cartridge on the absorbent material for an extended period.
9. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
10. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.

Carefully follow the refill instructions below to refill your HP Color Inkjet CP1160 ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Color Inkjet CP1160 ink cartridges although the principles are the same if you already have a refill kit

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. The fill holes are located under the coloured top of the cartridge.
2. Pierce through the top of the label with an old ball point pen ( A ).
3. Assemble the syringe and needle , Pierce the bottle seal and draw up some ink.
4. Important the cartridge contains a felt material not sponge, so you will have to drip the ink into the appropriate holes very slowly. The felt material will naturally draw the ink into it.
5. Ensure the correct colour ink is injected into the appropriate chamber.
6. When the felt is saturated, wipe away any excess ink and place strong adhesive tape over the fill holes.
7. Install the cartridge and run a cleaning cycle. Please note the ink indicator may need to be turned off if so please follow these instructions.
8. Black press ( comma ) and ( full stop ) at the same time then release, on keypad press in order 7,8,9,3 when the prompt appears asking if you want to override the ink level gauge, press 1 for yes or 2 for no.
9. Colour press ( comma ) and ( full stop ) at the same time then release, on keypad press in order 4,5,6,3 when the prompt appears asking if you want to override the ink level gauge, press 1 for yes or 2 for no.
10. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.

Carefully follow the refill instructions below to refill your HP Color Copier 290 black ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Color Copier 290 black ink cartridges although the principles are the same if you already have a refill kit.

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Turn the cartridge upside down. Remove the plastic film that seals the filling hole ( A ) and push the ball bearing into the cartridge using an old ballpoint pen.
2. Important do not damage the hole when pushing the ball bearing into the cartridge. Note the inserted ball bearing will not damage the cartridge.
3. Assemble the syringe and needle , Pierce the bottle seal and draw up some black ink.
4. Gently fill the cartridge with ink. ( The cartridge must remain upright until instructed ).
5. Once the cartridge is full, the fill hole can now be plugged using one of the red plugs. Important the plug must be airtight if not the cartridge will leak.
6. To pressure balance the cartridge correctly, prepare a thick pile of kitchen paper. Turn the cartridge the right way up and dab off the ink that drips from the printhead. This is normal and will stop quickly when the cartridge has balanced.
7. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
8. Important do not leave your cartridge on the absorbent material for an extended period.
9. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
10. Clean the syringe and needle for future use.

HP Color Copier 290 Colour Ink Cartridge Refill Instructions

Carefully follow the refill instructions below to refill your HP Color Copier 290 colour ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Color Copier 290 colour ink cartridges although the principles are the same if you already have a refill kit.

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

Important when refilling take care to refill colours as per the picture Not - as inferred on the cartridge label.

1. The filling holes are located on top of the cartridge. Using the drill provided, make holes in the positions marked.
2. Assemble the syringe and needle , Pierce the bottle seal and fill with the correct colour ink.
3. Insert the needle into the filling hole and push down into the cartridge. Important the cartridge contains sponge and slight resistance may be felt.
4. Slowly inject the ink. Blot the printhead with tissue to remove any excess ink before continuing to refill the next colour.
5. Important do not reseal the filling holes. Clean the syringe with water and dry before refilling with another colour.
6. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
7. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
8. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.

Carefully follow the refill instructions below to refill your HP Color Copier 280 black ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Color Copier 280 black ink cartridges although the principles are the same if you already have a refill kit.

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Turn the cartridge upside down. Remove the plastic film that seals the filling hole ( A ) and push the ball bearing into the cartridge using an old ballpoint pen.
2. Important do not damage the hole when pushing the ball bearing into the cartridge. Note the inserted ball bearing will not damage the cartridge.
3. Assemble the syringe and needle , Pierce the bottle seal and draw up some black ink.
4. Gently fill the cartridge with ink. ( The cartridge must remain upright until instructed ).
5. Once the cartridge is full, the fill hole can now be plugged using one of the red plugs. Important the plug must be airtight if not the cartridge will leak.
6. To pressure balance the cartridge correctly, prepare a thick pile of kitchen paper. Turn the cartridge the right way up and dab off the ink that drips from the printhead. This is normal and will stop quickly when the cartridge has balanced.
7. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
8. Important do not leave your cartridge on the absorbent material for an extended period.
9. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
10. Clean the syringe and needle for future use.

HP Color Copier 280 Colour Ink Cartridge Refill Instructions

Carefully follow the refill instructions below to refill your HP Color Copier 280 colour ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Color Copier 280 colour ink cartridges although the principles are the same if you already have a refill kit.

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

Important when refilling take care to refill colours as per the picture Not - as inferred on the cartridge label.

1. The filling holes are located on top of the cartridge. Using the drill provided, make holes in the positions marked.
2. Assemble the syringe and needle , Pierce the bottle seal and fill with the correct colour ink.
3. Insert the needle into the filling hole and push down into the cartridge. Important the cartridge contains sponge and slight resistance may be felt.
4. Slowly inject the ink. Blot the printhead with tissue to remove any excess ink before continuing to refill the next colour.
5. Important do not reseal the filling holes. Clean the syringe with water and dry before refilling with another colour.
6. Once the ink has stopped dripping from the printhead, insert your cartridge back into your printer and operate a cleaning cycle.
7. Your printer driver may display a screen to indicate that the cartridge is still empty, close this screen and continue as normal.
8. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.