HP Photosmart 7960 Ink Cartridge Refill Instructions

Carefully follow the refill instructions below to refill your HP Photosmart 7960 ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Photosmart 7960 ink cartridges although the principles are the same if you already have a refill kit.

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Remove the identification label from the top of the cartridge.
2. Assemble the syringe and needle , Pierce the bottle seal and fill with the correct colour ink.
3. Insert your needle into the appropriate fill hole and push down into the cartridge. Ensure that you are filling the correct colour chamber with the correct colour ink.
4. Important the cartridge contains sponge and slight resistance may be felt.
5. Slowly inject the ink. When the ink appears at the filling hole, pull back the syringe plunger slightly to remove the excess ink.
6. Blot the printhead with absorbent material until it stops dripping before moving on to the next colour.
7. Do not replace the identification label.
8. Ensure the printhead has stopped dripping before returning the cartridge to the printer. Operate the printers cleaning cycle.
9. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately