HP Deskwriter 560c Colour Ink Cartridge Refill Instructions

Carefully follow the refill instructions below to refill your HP Deskwriter 560c colour ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling HP Deskwriter 560c colour ink cartridges although the principles are the same if you already have a refill kit.

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. The filling holes are located under the top of the cartridge which must be removed before filling. The easiest way is to carefully cut along the seal with a sharp instrument such as a penknife.



2. Alternatively snap the top of the cartridge off in a vice. This will not permanently damage your cartridge, if the clear cover located under the cap also comes off do not worry, insert the needle when refilling into the centre of the foam.



3. Assemble the syringe and needle , Pierce the bottle seal and draw up 10ml of colour ink.



4. Using the picture above to ensure the ink is injected into the correct chamber, insert the needle into the filling hole and push down into the cartridge.



5. Important the cartridge contains sponge and slight resistance may be felt.



6. Slowly fill each chamber with 10ml of the correct colour ink. If ink appears on top of the sponge stop filling the chamber and slightly withdraw the syringe plunger. Remove the needle.



7. Clean the syringe with water and dry before refilling with another colour.



8. The top of the cartridge can now be refitted and secured with adhesive tape. You may need to blot the printhead slightly with kitchen paper.



9. Put the cartridge back in the printer and operate a cleaning cycle.



10. Your cartridge is ready for use.



11. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.