Canon BJ330 Ink Cartridge Refill Instructions

Carefully follow the refill instructions below to refill your Canon BJ330 ink cartridges.

These instructions are based on using a Jettec refill kit with specifically formulated inks suitable for refilling Canon BJ330 ink cartridges although the principles are the same if you already have a refill kit

Always Cover Your Working Area
With Folded Kitchen Paper In Case Of Ink Spillage

1. Assemble the syringe and needle , Pierce the bottle seal and draw up some ink at this point be sure not to draw any excess air into the syringe



2. Push the needle into the centre of the rubber bung and about 10mm inside the cartridge. Do not push the needle any further as this could puncture the ink bag.
   
   
3. Slowly fill the cartridge with ink until the bag is full, due to the size of the ink bag this could take 2 -3 syringes full of ink.
   
   
4. Return any excess ink back to the bottle
   
   
5. Your cartridge is now ready to use
   
   
6. Clean the syringe and needle for future use.

For Best Results Refill Empty Cartridges Immediately

All brand names and trademarks are properties of their respective holders and referred to for descriptive purposes only.